How do you start a Stihl fs110r?

How do you Unflood Stihls?

To avoid flooding the engine when cold starting a Stihl Chain Saw, move the master control lever into the half-choke position following the fourth attempt. As soon as the saw turns on, move the lever to the minimum choke position.

How do you start a flood trimmer? The spark plug of a flooded trimmer is extremely wet from excess gas. The spark plug reservoir should face you. Slide the choke lever into the aRuna position. Quickly pull the starter cord 10 to 15 times.

You might also ask: How do you Unflood your trimmer?

Unflooding a Weedeater

1. Make sure the switch is switched on and off.
2. Hold the throttle button with one hand and squeeze it.
3. Once the engine starts, continue holding down the throttle trigger for fifteen seconds.
4. If the trimmer doesn't start, disconnect the spark plug wire at the top.

How can you unflood whipper snippers?

To loosen the spark plug, place an adjustable wrench on it. Turn it counterclockwise. The spark plug should be pulled out of the Weed Eater. The spark plug of a flooded motor is damp at the bottom and strongly smelts like gasoline. Move to the opposite end of the Weed Eater and away from the spark plug hole.