How do I load a Stihl Autocut

Place the end of one length of line into one eye of the spool. Wind the line according the direction indicated. Make sure that the line is tightly wound. Place the line end in the opening on the spool.

Click to see full answer

How do you modify the line on a Stihl FS 45, according to this article?

Tie the string tightly to the Stihl FS 45 trimmer.

Let the engine cool down by turning off the FS 45 trimmer.
Keep the retainer's outer rim in place.
Take approximately 25 feet of string and cut it in half.
With one hand, hold the inner reel and the other, wind the string around it.

Also, what size of line should a Stihl trimmer use. String Diameters The Stihl AutoCut 25-2, for example, requires a. A 08-inch line, or a. 095-inch line. Each trimmer head model is different, so make sure to read the label on your trimmer heads.

How much does a Stihl whipper-snipper cost?

STIHL FS38 Grass Trimmer

Versions	Price
Petrol Grass Trimmer FS 38 – AutoCut 5-2	$199.00*

Which trimmer is the best?

The 10 Best Trimmer Lines You Can Buy in 2020

Name of the product	Length	Rating
1. Black & Decker AF100-3ZP Trimmer Line	30 feet	4.6
2. DeWalt DWO1DT802 Trimmer Line	225 feet	4.6
3. Cyclone Commercial Trimmer Line CY155S3	315 feet	4.6
4. Black & Decker DF065 Replacement Spool	40 feet	4.4

6 Related Question Answers Found

How do you load a Stihl AutoCut c25 2?

AutoCut C 25-2

Step 1 of 4: Moving the mowing head spool into position. Rotate the end of the mowing head spool until the indentations line up with the arrows on the base plate.
Step 2 of 4: Inserting the line. Now take a piece of line with a max.
Step 3 of 4: Winding on the line.
Step 4 of 4: Cutting the line.

What size line does a Stihl FS 38 use?

095 line. A 2.5mm (.

How does the Stihl AutoCut head work?

The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.

How much is a Stihl FS 45?

STIHL FS 45 Grass Trimmer

Versions	Price
Petrol Grass Trimmer - FS 45 - AutoCut C 5-2	$249.00*

How does a bump feed grass trimmer work?

When you press the head of your trimmer against a flat surface, it squeezes a spring in the head of the string trimmer. This action releases string from the spool so you have a line with which you can cut down debris. The bump feed electric trimmer uses centrifugal force to pull the string from the spool.

What is the On position on a Stihl weedeater?

While engaging both levers, move the starter switch to the "On" position, indicated on most gas models by a capital "I" symbol. Some models use a "Start" position and require you to move the switch to the "I" position once the engine turns over.

How do I load a Stihl Autocut

How do Lauren's Grape poppies grow?

Are high CPK levels dangerous?

What is the life expectancy of a hot water boiler?

What goes good with warm brie?

Do you need a special drill bit for granite?

How do you bonsai a juniper tree?

?Cuales son los pares craneales sensitivos?

How can I see my Apple Pay transactions?