How do you paint a wrought iron bed?

This begs the question: What paint can you use to paint a metal frame?

I have painted many metal beds. Here is what I do: I lightly sand the surface with steel wool or fine-grade sandpaper (sand any rusty areas); then I spray paint for metal (I use Rust Oleum again); let dry 24 hours; then I spray paint a light coat of paint; dry completely; lightly sand.

How do you paint a bed made of steel? Painting Your Steel Bed Frame

1. You should paint in an area with good ventilation.
2. You can find old bricks, frames, ladders, and crates.
3. As much as possible, disassemble the frame.
4. Use hot water and detergent to wash the frame. Dry it with a towel.
5. Use fine sandpaper to lightly sand the surface.
6. To remove any dust that may have accumulated during sanding, vacuum the frame.

How do you refinish an Iron Bed?

Clean it. Use a sponge with an abrasive edge to clean the outdoor bed. Dip it in 1/4 cup mild dishwashing detergent into a gallon warm water. To remove dirt, grime, and flaky rust from the mattress, scrub it. You can continue scrubbing the bed as often as necessary to remove dirt and other debris.

Can I paint metal using a brush?

You can use a brush, roller or spray paint that is designed for metal applications (manufacturers such as Rust-Oleum or Krylon offer spray paints in many colors and sheens). You should apply several coats of paint, and let it dry between each coat for at least a couple hours.