How do I program my orbit6 sprinkler system?

How do you program an orbit 6 sprinkler system?

Programming 6-Station Timers

1. To access "Cycle Start Times", turn the dial.
2. To set the time, press the "+" (or "-") key.
3. To confirm the start time, press "Enter".
4. To set the start time of each program, press "Next".

What is budget in an orbit sprinkler system? Between the current time and the remaining hours of. Every 2 seconds. Water Budgeting. Water budgeting allows you to adjust the watering time to meet seasonal watering requirements. Water budgeting involves increasing or decreasing the watering duration at all stations within each program.

This is how to test an orbital sprinkler system.

The Timer Box

1. To test the valves of the Easy Dial or Easy Set Orbit timers, turn the dial to the "Auto” position and then press the "Manual” key.
2. To test valves using Orbit's "Individual Station Slide", turn the dial to the "Auto” position. Then, move the slide switch to the "Manual On” position.

What amount of water do I need for my lawn?

Your lawn requires at least 1a-1A 1/2 a water every week throughout the year. This is also true during winter. Water thoroughly 2-3 times per week, instead of daily. Water as early as possible . You are not watering your lawn enough if you can't push a 6a wrench into it.