How do I fix my Kohler Devonshire faucet?
- One hand should hold the handle. Turn the skirt, which is the decorative flared part below the handle, clockwise with your other hand.
- To expose the valve, remove all remaining parts. Re-use all parts.
- You can now replace the valve or make other repairs.
- Reassemble the handle parts in reverse order.
So, how do you fix your Kohler faucet handle.
Replace the Valve on a Single-Handle Faucet
- Turn off the water supply to the faucet.
- Take the plug button out of the handle (Fig.
- To remove the handle, loosen the screw under the plug button (Fig.
- To expose the valve and mounting nut, turn the bonnet clockwise. The bonnet should be easy to remove by hand (Fig.
You may also be wondering how to remove a Kohler kitchen faucet. You will need to disconnect the supply line for a Kohler kitchen faucet. Make sure that the water is off. These can be removed with an adjustable wrench. Next, reach below and behind the sink basins for the screws.
How do you change the washer on a Kohler faucet's faucet?
The old washer should be removed from the bottom of your faucet valve stem. Remove the old washer from the faucet stem. Wrap plumber's tape around it before replacing all the screws and ring. The wrench should be used to tighten the nut until it is secure.
Where can I find my faucet model number
The faucet's model number is printed on a tag attached to the cold water supply. The supply line is located beneath the sink, countertop, bath-rim or bowl of a bidet. The model number or the part number is usually preceded by "P/N. "