Asked by: Zaynab Lagomazzini
Asked in category: technology and computing, computer networking
Last Updated: 23rd Jul 2024

What is the spanning tree problem?

Spanning Tree In a Nutshell
STP is a way to prevent loops and block links within an Ethernet network. The root bridge of a span tree is the logical centre and receives all traffic. Spanning tree recalculations can be performed automatically when the network changes, but may cause temporary network outages.



Also, can a spanning tree cause problems

Spanning Tree isn't necessarily bad or right, but there are many limitations to its operation and design. STP's most significant flaw is its brittle failure mode. This can cause complete network or data center collapses when it goes wrong.

Also, know how to troubleshoot a spanning tree. Troubleshooting Spanning Trunk Protocol (STP)

  1. Bridge address: This is the MAC address for the current switch.
  2. Address of the Root Bridge - The MAC address for the current Root Bridge.
  3. Forwarding and delays: Current configured values for the delay and forwarding timers.
  4. Port status for this VLAN: Status the ports configured in that VLAN.

What is the purpose of a spanning tree?

Spanning Tree Protocol (STP), a network protocol, is designed to create a topology that is free from loops for Ethernet networks. STP's primary function is to prevent bridge loops from occurring and the radio radiation that they generate.

What is the cause of topology changes in span trees?

Topology changes in Spanning Tree Protocol The Root Switch bridge broadcasts topology information to the entire network.