Asked by: Daniel Valli
Asked in category: automotive, auto parts
Last Updated: 23rd Jul 2024

How can you remove the rear wiper arm covering on a Chevy Equinox

Removing the Rear Wiper Arm of 05-09 Chevy Equinox
  1. Step 1: Remove the Wiper blade (0:48). Mark the location with painters tape on your windshield. Take off the wiper arm covering. Remove the 13mm nut.
  2. Step 2: Installing Wiper Arm (1.58) Pull out the wiper arm tab. Push the arm onto your splines. Secure the 13mm nut.

How do you remove a rear windshield washer?

How to replace a rear windshield wiper

  1. Move the wiper arm out of the rear window until the wiper lock is in an outward position.
  2. Turn the blade at an angle towards the wiper blade arm to remove it.
  3. Place the blade in the wiper arm and ensure that it locks properly.
  4. Place the wiper arm in the rear window.

How do you attach a rear wiper arm to the vehicle? All wiper arms fit onto the splined shaft (Photo 1) Some arms are secured with a nut. You can replace the damaged one by removing the protective cap and the nut. (Photo 2).

This is how to change the windshield wiper arm of a Chevy.

  1. Step 1: Take off the wiper arms (0.50). Flip the arm upwards. Use a flat blade screwdriver to remove the tab at its base.
  2. Step 2: Install the new wiper arm (1:10) Press the button to slide the wiper blade out. The wiper blade should be placed on the wiper arm before being reinstalled onto the vehicle.

Is it possible to install rear wipers in my car?

1) Yes, it is possible to install rear window wipers on swift. You can change the rear hatch door to Swift Zxi because it has the ability to accommodate the wiper motor.